Remove some old v1 stuff

analysis/bootstrap_NNLOJET_modules2_rev6591_bridge-0.0.46-WiP_202307.sh

-#!/usr/bin/env bash
-
-# Bootstrap file for batch jobs that is sent with all jobs and
-# automatically called by the law remote job wrapper script to find the
-# setup.sh file of this example which sets up software and some environment
-# variables. The "{{analysis_path}}" variable is defined in the workflow
-# base tasks in analysis/framework.py.
-
-action() {
-
-    # law + luigi env variables
-    local base="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-    export LAW_HOME="$base/.law"
-    export LAW_CONFIG_FILE="$base/law.cfg"
-    export LUIGI_CONFIG_PATH="$base/luigi.cfg"
-    export ANALYSIS_PATH="$base"
-    export ANALYSIS_DATA_PATH="$ANALYSIS_PATH/data"
-
-    # luigi + law
-    export PATH="$base/law/bin:$base/luigi/bin:$PATH"
-    export PYTHONPATH="$base/law:$base/luigi:$base/six:$base/python-dateutil-2.8.2:$base:$PYTHONPATH"
-
-    # lcg software stack with python3 and gcc11 (use the same one as for cvmfs install of NNLOJET & APPLfast)
-    source /cvmfs/sft.cern.ch/lcg/views/LCG_102/x86_64-centos7-gcc11-opt/setup.sh
-
-    # grid storage interface with gfal2, if required
-    # C7 with python3
-    source /cvmfs/grid.cern.ch/centos7-ui-200122/etc/profile.d/setup-c7-ui-python3-example.sh
-
-    # NNLOJET + APPLfast (cvmfs)
-    applfastpath="/cvmfs/etp.kit.edu/fastnnlo-2888_bridge-0.0.46-WiP_202307_lcg102-c7-gcc11"
-    #applfastpath="/eos/theory/project/applfast/local"
-    # LCG not needed here since source'd already above!
-    # NNLOJET & APPLfast
-    source $applfastpath/src/fnlosrc_source.sh
-    # Rivet
-    source $applfastpath/src/rivetenv.sh
-    # If fastNLO version of grid install in /cvmfs/etp.kit.edu not new enough for evaluation,
-    # then use local install for plotting etc, but keep scripts of NNLOJET in PATH
-    #export PATH="$applfastpath/src/NNLOJET_rev6591/driver/bin:$PATH"
-
-    #export PYTHONPATH="$PWD:$PYTHONPATH" ???
-
-    tar -xzf analysis*.tar.gz
-    rm analysis*.tar.gz
-
-}
-action

setup_law_c7.sh

-#!/usr/bin/env bash
-
-action() {
-
-    # law + luigi env variables
-    local base="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-    export LAW_HOME="$base/.law"
-    export LAW_CONFIG_FILE="$base/law.cfg"
-    export LUIGI_CONFIG_PATH="$base/luigi.cfg"
-    export ANALYSIS_PATH="$base"
-    export ANALYSIS_DATA_PATH="$ANALYSIS_PATH/data"
-
-    # luigi + law
-    export PATH="$base/law/bin:$base/luigi/bin:$PATH"
-    export PYTHONPATH="$base/law:$base/luigi:$base/six:$base/enum34-1.1.10:$base/python-dateutil-2.8.2:$base:$PYTHONPATH"
-
-    # grid storage, if required
-    # gfal2, not required for plotting
-    # SLC6
-    # source /cvmfs/grid.cern.ch/emi3ui-latest/etc/profile.d/setup-ui-example.sh
-    # C7
-    # source /cvmfs/grid.cern.ch/centos7-ui-v03/etc/profile.d/setup-c7-ui-example.sh
-    source /cvmfs/grid.cern.ch/umd-c7ui-latest/etc/profile.d/setup-c7-ui-example.sh
-    #
-    # Proxy location on afs required by lxplus if using grid storage
-    # export X509_USER_PROXY=/afs/cern.ch/user/k/krabbert/tmp/x509up_u7747
-
-    # fastNLO tools (perl and python scripts)
-    # Required to merge fastwarm results or for plotting (needs python3, matplotlib3, numpy, scipy)
-    # Add local paths to git checkout, e.g.
-    #gitpath="/storage/9/rabbertz/git/fastNLO"
-    #gitpath="/eos/theory/project/applfast/git/fastNLO"
-    #export PATH="$gitpath/tools:$gitpath/tools/plotting:$PATH"
-
-    # fastNLO installation (local)
-    # If grid install is too old or uses fastNLO extension compiled with python2
-    # !!! Does not work on systems of ETP portals or lxplus with Centos7!
-    # --> Either use your more modern Desktop PC e.g. with Ubuntu and properly set PATH and PYTHONPATH
-    # --> or use install with lcg software stack from /cvmfs/sft.cern.ch/lcg/views
-    # Here, lcg environment and PATH, PYTHONPATH are set from local installation file
-    #fnlopath="/storage/9/rabbertz/local.lcg101.py3"
-    #fnlopath="/eos/theory/project/applfast/local.py3"
-    #source $fnlopath/src/lcg_source.sh      # LCG software stack
-    #source $fnlopath/src/fnlosrc_source.sh  # fastNLO
-    #source $fnlopath/src/rivetenv.sh        # Rivet
-
-    # NNLOJET + APPLfast
-    # Uses grid install; does not use fastNLO extension compiled with python2
-    applfastpath="/cvmfs/etp.kit.edu/fastnnlo-bridge-0.0.46"
-    #applfastpath="/eos/theory/project/applfast/local"
-    source $applfastpath/src/fnlosrc_source_NNLOJET_rev5918.sh
-    # If fastNLO version of grid install in /cvmfs/etp.kit.edu not new enough for evaluation,
-    # then use local install as for plotting, but keep scripts of NNLOJET in PATH
-    #export PATH="$applfastpath/src/NNLOJET_rev5918/driver/bin:$PATH"
-
-    # Output path for local production output on lxplus; not required when using grid storage
-    #export ANALYSIS_OUTPUT_PATH="$applfastpath/output"
-
-    source "$( law completion )"
-}
-action

setup_law_plotting.sh

-#!/usr/bin/env bash
-
-action() {
-
-    # law + luigi env variables
-    local base="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-    export LAW_HOME="$base/.law"
-    export LAW_CONFIG_FILE="$base/law.cfg"
-    export LUIGI_CONFIG_PATH="$base/luigi.cfg"
-    export ANALYSIS_PATH="$base"
-    export ANALYSIS_DATA_PATH="$ANALYSIS_PATH/data"
-
-    # luigi + law
-    export PATH="$base/law/bin:$base/luigi/bin:$PATH"
-    export PYTHONPATH="$base/law:$base/luigi:$base/six:$base/python-dateutil-2.8.2:$base:$PYTHONPATH"
-
-    # grid storage, if required
-    # gfal2, not required for plotting
-    # SLC6
-    # source /cvmfs/grid.cern.ch/emi3ui-latest/etc/profile.d/setup-ui-example.sh
-    # C7
-    # source /cvmfs/grid.cern.ch/centos7-ui-v03/etc/profile.d/setup-c7-ui-example.sh
-    # source /cvmfs/grid.cern.ch/umd-c7ui-latest/etc/profile.d/setup-c7-ui-example.sh
-    #
-    # Proxy location on afs required by lxplus if using grid storage
-    # export X509_USER_PROXY=/afs/cern.ch/user/k/krabbert/tmp/x509up_u7747
-
-    # fastNLO tools (perl and python scripts)
-    # Required to merge fastwarm results or for plotting (needs python3, matplotlib3, numpy, scipy)
-    # Add local paths to git checkout, e.g.
-    gitpath="/storage/9/rabbertz/git/fastNLO"
-    #gitpath="/eos/theory/project/applfast/git/fastNLO"
-    export PATH="$gitpath/tools:$gitpath/tools/plotting:$PATH"
-
-    # fastNLO installation (local)
-    # If grid install is too old or uses fastNLO extension compiled with python2
-    # !!! Does not work on systems of ETP portals or lxplus with Centos7!
-    # --> Either use your more modern Desktop PC e.g. with Ubuntu and properly set PATH and PYTHONPATH
-    # --> or use install with lcg software stack from /cvmfs/sft.cern.ch/lcg/views
-    # Here, lcg environment and PATH, PYTHONPATH are set from local installation file
-    fnlopath="/storage/9/rabbertz/local.lcg101.py3"
-    #fnlopath="/eos/theory/project/applfast/local.py3"
-    source $fnlopath/src/lcg_source.sh      # LCG software stack
-    source $fnlopath/src/fnlosrc_source.sh  # fastNLO
-    source $fnlopath/src/rivetenv.sh        # Rivet
-
-    # NNLOJET + APPLfast
-    # Uses grid install; does not use fastNLO extension compiled with python2
-    applfastpath="/cvmfs/etp.kit.edu/fastnnlo-bridge-0.0.46"
-    #applfastpath="/eos/theory/project/applfast/local"
-    # source $applfastpath/src/fnlosrc_source_NNLOJET_rev5918.sh
-    # If fastNLO version of grid install in /cvmfs/etp.kit.edu not new enough for evaluation,
-    # then use local install as for plotting, but keep scripts of NNLOJET in PATH
-    export PATH="$applfastpath/src/NNLOJET_rev5918/driver/bin:$PATH"
-
-    # Output path for local production output on lxplus; not required when using grid storage
-    #export ANALYSIS_OUTPUT_PATH="$applfastpath/output"
-
-    source "$( law completion )"
-}
-action

setup_law_rivet.sh

-#!/usr/bin/env bash
-
-action() {
-
-    # law + luigi env variables
-    local base="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-    export LAW_HOME="$base/.law"
-    export LAW_CONFIG_FILE="$base/law.cfg"
-    export LUIGI_CONFIG_PATH="$base/luigi.cfg"
-    export ANALYSIS_PATH="$base"
-    export ANALYSIS_DATA_PATH="$ANALYSIS_PATH/data"
-
-    # luigi + law
-    export PATH="$base/law/bin:$base/luigi/bin:$PATH"
-    export PYTHONPATH="$base/law:$base/luigi:$base/six:$base/enum34-1.1.10:$base/python-dateutil-2.8.2:$base:$PYTHONPATH"
-
-    # fastNLO tools (mostly perl scripts)
-    # Required to merge fastwarm results for example
-    # Add local user path of git checkout, e.g.
-    export PATH="$HOME/git/fastNLO/tools:$PATH"
-
-    # fastNLO plotting (needs python3, matplotlib3, numpy, scipy)
-    # Required to produce any plots
-    # --> Does not work on ETP portals with Centos7 like bms1,3!
-    # --> Use your more modern Desktop PC e.g. with Ubuntu and properly set PATH and PYTHONPATH
-    # Rivet only works with python2
-    # Add local user paths for fastNLO plottings with python3 usage, e.g.
-    #    export PATH="$HOME/git/fastNLO/tools/plotting:$HOME/local/bin:$PATH"
-    export PATH="$HOME/git/fastNLO/tools/plotting:$HOME/local.lx25-python2/bin:$PATH"
-    #    export PYTHONPATH="$HOME/local/lib/python3.8/site-packages:$PYTHONPATH"
-    export PYTHONPATH="$HOME/local.lx25-python2/lib/python2.7/site-packages:$PYTHONPATH"
-
-    # gfal2, not required for plotting
-    # SLC6
-    # source /cvmfs/grid.cern.ch/emi3ui-latest/etc/profile.d/setup-ui-example.sh
-    # C7
-    #    source /cvmfs/grid.cern.ch/centos7-ui-v03/etc/profile.d/setup-c7-ui-example.sh
-
-    # NNLOJET + APPLfast
-    # Uses grid install; does not use fastNLO extension compiled with python2
-    #    source /cvmfs/etp.kit.edu/fnlo/src/fnlosrc_source_NNLOJET-5419.sh
-    #    source /cvmfs/etp.kit.edu/fastnnlo-bridge-0.0.46/src/fnlosrc_source_NNLOJET_rev5918.sh
-    # If fastNLO version of grid install in /cvmfs/etp.kit.edu not new enough for evaluation,
-    # then use local install on bms1/3:
-    #    export PATH="$HOME/local.s9/bin:$PATH"
-    #    export LD_LIBRARY_PATH="$HOME/local.s9/lib:$LD_LIBRARY_PATH"
-    # For plotting must use local install e.g. on lx25 with fastNLO extension compiled with python3
-    #    source $HOME/local/src/fnlosrc_source.sh
-    # Rivet only works with python2
-    source $HOME/local.lx25-python2/src/fnlosrc_source.sh
-
-    source "$( law completion )"
-}
-action

setup_law_slc6.sh

-#!/usr/bin/env bash
-
-action() {
-
-    # law + luigi env variables
-    local base="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-    export LAW_HOME="$base/.law"
-    export LAW_CONFIG_FILE="$base/law.cfg"
-    export LUIGI_CONFIG_PATH="$base/luigi.cfg"
-    export ANALYSIS_PATH="$base"
-    export ANALYSIS_DATA_PATH="$ANALYSIS_PATH/data"
-
-    # luigi + law
-    export PATH="$base/law/bin:$base/luigi/bin:$PATH"
-    export PYTHONPATH="$base/law:$base/luigi:$base/six:$base/enum34-1.1.10:$base/python-dateutil-2.8.2:$base:$PYTHONPATH"
-
-    # fastNLO tools + plotting
-    export PATH="/storage/9/rabbertz/git/fastNLO/tools:/storage/9/rabbertz/git/fastNLO/tools/plotting:$PATH"
-
-    # From now on: Plotting only with python3 and matplotlib3 (requiring numpy & scipy)
-    # --> Does not work on ETP portals with Centos7!
-    # --> Use your more modern Desktop PC e.g. with Ubuntu and properly set PATH and PYTHONPATH
-    # Add local user paths for python3 usage, e.g.
-    # export PATH="$HOME/.local/bin:$PATH"
-    # export PYTHONPATH="$HOME/.local/lib/python3.5/site-packages:$PYTHONPATH"
-
-    # gfal2, not required for plotting
-    # SLC6
-    source /cvmfs/grid.cern.ch/emi3ui-latest/etc/profile.d/setup-ui-example.sh
-    # C7
-    #    source /cvmfs/grid.cern.ch/centos7-ui-v03/etc/profile.d/setup-c7-ui-example.sh
-
-    # NNLOJET + APPLfast
-    # Uses grid install; does not use fastNLO extension compiled with python2
-    source /cvmfs/etp.kit.edu/fnlo/src/fnlosrc_source_NNLOJET-5419.sh
-    # Must use local install with fastNLO extension compiled with python3
-    #    source $HOME/local.lx25/src/fnlosrc_source.sh
-
-    # NNLOJET combine script
-    export PATH="/cvmfs/etp.kit.edu/fnlo/src/NNLOJET_rev5419/driver/bin:$PATH"
-    #    export PATH="$HOME/local.lx25/src/NNLOJET_rev5419/driver/bin:$PATH"
-
-    source "$( law completion )"
-}
-action